Aposonic A-H2A8D2 Uživatelský manuál Strana 125
- Strana / 125
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
- 125 -
Appendix F – Protocol Converter for Multiple POS
Multiple POS devices can be connected through the RS-232 port of the DVR. Please
refer to Section 3.2 Optional Connections for the connections. Please refer to page
22/23 of 7524 Hardware User’s Manual for the pin assignment of I-7523, which is similar
to protocol converter I-7524.
Please note that the RS-485 module address of the protocol converter must be 1, 5, 9 or
13(Hex 0D), and the addresses of the POS devices connected are 1/2/3/4, 5/6/7/8,
9/10/11/12, and 13/14/15/16 respectively. The corresponding cameras for POS device
addresses 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16 are cameras
1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16.
The default RS-485 module address of the protocol converter is 1. If the user wants to
change the RS-485 module address of the protocol converter to 5/9/13, please do the
following steps:
1. Connect the protocol converter to the RS-485 network of a host PC. (Please
refer to page 9 in I-7524 Software User’s Manual. RS-232-to-RS-485 converter
can be used in place of 7520.)
2. Execute 7188X.EXE in the host PC. (Please uncompress the file
\Napdos\MiniOS7\utility\7188xw_20050127.zip in the bundled 7000/7188/8000
CD to get the executable.)
3. Select the active COM port of the host PC by pressing Alt-1 for COM1 or Alt-2
for COM2.
4. Change the baud rate to 38400 by pressing Alt-C first, then enter b38400 to set
baud rate to 38400.
5. Change to Line-Command-Mode by pressing Alt-L.
6. Change the RS-485 module address by entering $01AXX. (01 is the original
module address, XX is the new module address such as 01/05/09/0D.)
Please note that the other settings for the protocol converter are Baud Rate = 38400, Data
Bit = 8, Stop Bit = 1, and Parity = None. Those settings cannot be changed, and have
nothing to do with the RS-232/422/485 Setup (which is related to the settings of the POS
printers connected).
- CAUTION 2
- LIMITATION OF LIABILITY 3
- DISCLAIMER OF WARRANTY 3
- PRECAUTIONS 4
- Table of Contents 5
- 1. Product Overview 7
- 2.1 Front Panel 9
- 2.2 Back Panel 12
- 2.3 Remote Controller 14
- 3. Installations 15
- 3.2 Optional Connections 17
- 4.1 Text Input 22
- 4.2 Login And Logout 23
- 4.3 Basic Operations 23
- 4.4 Digital Zoom 25
- 5. Menu Display 27
- 5.1 Status Display 28
- 5.2 Volume Control 29
- 5.4 Display 31
- 5.5 Backup Device 33
- 6. Setup (Administrator) 38
- 6.1 Pre-Camera Setup 39
- 6.2 Camera Setup 41
- 6.2.1 Video Loss Setup 43
- 6.2.2 Motion Setup 45
- 6.3 Alarm Setup 48
- 6.4 SEQ Display Setup 51
- 6.5 Scheduled Record Setup 53
- 6.6 HDD Setup 56
- 6.6.1 HDD Format/Clear 58
- 6.6.2 Advanced HDD Setup 61
- 6.7 Password Setup 63
- 6.8 System Setup 67
- 6.9 RS-232/422/485 Setup 68
- 6.10 Network Setup 71
- 6.10.1 E-mail Setup 74
- 6.10.2 FTP Setup 75
- 6.10.3 3G Modem Setup 76
- 7. PTZ Control 80
- 8.1 Search By Time 83
- 8.3 Smart Search 86
- 8.4 Search Archived Files 89
- 8.5 POS Search 90
- 9. Remote Access 98
- 9.1 PC Remote Access 98
- - 100 100
- - 101 101
- - 102 102
- - 103 103
- - 104 104
- - 105 105
- - 106 106
- - 107 107
- - 108 108
- - 109 109
- Appendix A – Specifications 110
- - 111 111
- Appendix B – Time Zone Table 112
- - 114 114
- - 115 115
- - 116 116
- - 117 117
- - 118 118
- - 119 119
- - 120 120
- - 121 121
- - 122 122
- - 123 123
- - 124 124
- - 125 125
Samsung HT-DL70 manuály
Uživatelské manuály a uživatelské příručky pro Přijímače do aut Samsung HT-DL70.
Poskytujeme 1 manuály pdf Samsung HT-DL70 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Komentáře k této Příručce